A home renovation means clearing the space so the work can happen, storing everything properly while it does, and moving back in when the contractors are done. Unlike any other move, everything is going back into the same address, so how it is protected in between matters more than usual.
Everything leaving your home is coming back into a freshly renovated space. How it is protected in storage determines the condition it arrives in when the work is done.
You are going back to the same address. Everything has to be ready when you do.
A renovation relocation is not a permanent move. The destination is the same house it started in, just with new kitchen cabinets or a rebuilt primary bathroom or a whole interior gut. That changes what matters. The sofa that would be fine with a minor scratch on any other move is going back into a brand-new room where every mark will show. The dining table stored for four months needs to arrive in the same condition it left.
Royal Moving & Storage handles renovation relocations across eight markets in three phases: clearing the property before work starts, holding everything in climate-controlled storage while the renovation runs, and moving back in once the contractor is done. We work around partial clearances (just the kitchen, just the ground floor), flexible storage periods when timelines slip, and the care that items need when they are heading back into a finished space.
Most movers handle phase one and stop. A renovation relocation needs all three handled well, including the phase that happens months after the first truck left.
1
Phase One
Move Out
We clear the rooms the contractors need access to. Whole-home clearance or partial room-by-room, depending on the scope of the renovation. Furniture wrapped and protected so it survives storage without finishing damage.
What we handle
Full or partial clearance
Room-by-room sequencing if phased
Furniture disassembly for tight access
Full protection wrapping on all pieces
2
Phase Two
Stored During Renovation
Everything held in climate-controlled, access-controlled storage while the renovation runs. Renovation timelines routinely slip by weeks. The storage period is open-ended and adjusts to the contractor's schedule, not a fixed date.
What we handle
Climate-controlled storage vaults
Flexible period with no fixed end date
Inventory of what is stored and where
Access when you need specific items
3
Phase Three
Move Back In
When the renovation is complete, we deliver everything back and place it in the renovated space. The same care that went into protecting items going out applies coming back in, because they are going into a room with new paint and new floors.
One coordinator, both moves, flexible storage in between.
The same team that moves you out moves you back in. They know what was packed, how it was wrapped, and where it is sitting in storage when the call comes to return it.
01
Site visit and scope
We walk the property, establish what is moving, what can stay covered in place, and how many rooms need to be cleared. Transparent price confirmed before any work starts.
02
Clear and store
Furniture and contents wrapped, loaded, and moved to climate-controlled storage. Inventory logged so nothing is lost track of during the renovation period.
03
Flexible storage period
No fixed end date. Renovation timelines slip. We adjust to the contractor's schedule. When the work is done, you call and we arrange the return move.
04
Move back in
Delivery to the renovated space with floor and wall protection, furniture placed and reassembled, and the property left ready to live in.
A renovation relocation often needs careful packing, white-glove handling for high-value pieces, or a full clear-out of the property before work begins.
A general mover handles the move out and leaves you to figure out the rest.
Phase one is the part every mover does. Phases two and three are where a renovation relocation either works or falls apart.
A General Moving Company
Does phase one and disappears
Moves the furniture out and invoices. What happens next is your problem
No storage solution; you source it separately
Items wrapped for a single move, not for months of storage
Move-back-in is a new booking with a new company that does not know your inventory
New floors scratched on the way back in because nobody thought about protection
Royal Moving & Storage
All three phases, one team
Move out, storage, and move back in coordinated from one booking
Climate-controlled storage with inventory, flexible period
Items wrapped for long-term storage, not just a single truck ride
Same team returns with full knowledge of the inventory
Floor and wall protection on the return move into a finished space
What comes with a renovation relocation.
Transparent pricing
Written quote for move-out, storage, and move-back-in before anything starts.
Full or partial clearance
Whole-home or room-by-room, matching the scope of the renovation.
Climate-controlled storage
Items held safely for weeks or months, on a flexible timeline.
Inventory tracking
Every item logged so nothing is misplaced during a long storage period.
Long-term wrapping
Protection suited for months in storage, not just a single transit.
Move-back-in placement
Furniture returned to the renovated rooms, assembled and placed.
Floor and wall protection
New finishes protected on the return carry-in so nothing is marked on day one.
Licensed & insured
USDOT #3617767, bonded and insured on every phase of the job.
Get your free no obligation renovation relocation estimate today.
Keep your renovation stress free. Contact Royal Moving & Storage today for a no obligation quote for your home or apartment renovation relocation in Los Angeles.
1. How does storage work between move-out and move-back-in?
We move everything from the property into climate-controlled, access-controlled storage vaults. The storage period is open-ended and billed monthly. When you call to say the renovation is complete and the property is ready, we arrange the return move. There is no minimum or maximum storage period. If the contractor finishes in six weeks or takes six months, the arrangement adjusts to that.
2. What if the renovation runs much longer than expected?
That is normal, and the storage arrangement accounts for it. Renovation timelines almost always extend beyond the original estimate. Storage continues on a monthly basis until you are ready to move back in. You are not committed to a fixed end date, and we do not charge a penalty for a project running long. Just let your coordinator know when the space is ready and we schedule the return move from there.
3. Can you do a partial clearance if only certain rooms need to be emptied?
Yes. A kitchen renovation only needs the kitchen cleared; a bathroom renovation may only require clearing the bathroom and surrounding access. We work to the scope of the renovation rather than assuming everything needs to move. At the site visit we establish which rooms are affected and what needs to go into storage versus what can remain in place or be moved to another room within the property.
4. How do you protect new floors and freshly painted walls on the move-back-in?
We use floor runners and corner guards throughout the carry-in. Furniture is kept wrapped until it reaches its final position so it is not resting on new flooring during any repositioning. The same blankets and padding that went out come back on the return move. Tell your coordinator if there are any specific finishing concerns (newly polished timber, tile grout that is still curing, freshly stained concrete) so we can plan around them.
5. Can you coordinate timing directly with my contractor?
Yes. Provide the contractor’s contact and we will communicate directly to confirm the clearance schedule at the start of the project and the return schedule at the end. This avoids the homeowner acting as a go-between for two scheduling conversations. For phased renovations where different rooms are cleared at different times, we coordinate each phase separately with whoever is managing the build programme.